| Enclosures |
|
DIY Weatherproof Enclosure.
Dimensions: 12" x 12" x 6" deep
Approximately 12x12 inches.
Polycarbonate/ABS plastic enclosure with back panel. This
is the standard Animated Lighting enclosure. Weatherproof and has replaceable
hinges and latches for a long lifetime.
|
 |
 |
|
DIY Weatherproof Enclosure.
Dimensions: 12" x 12" x 6" deep with clear front
We
called up the vendor supplying enclosures for our controllers
and asked for suggestions. From deep in their warehouse
they pulled this ABS plastic box 12" square and 6" deep.
The front half is transparent and allows you to keep an eye on
what's happening inside. Large screws in each corner
secure the cover. There is limited quantity so grab a few now
for this year.
|
  |
|
$69.95 each (Part No.
AENCF-14-Clear) |
 |
|
|
Light
Controller Stand.
Dimensions: 12" x 20" x 30" high
We've been surprised how many people want an easy
way to mount their light controllers close to the action yet
easily move them around. We now have a custom built metal
stand that will answer your needs. 30" high and 12" wide
with 20" long stabilizing feet, this is just what you're looking
for. How many do you need?
Does not include light controllers.
|
 |
|
$69.95 each (Part No. LCS-20) |
|
|
Tree Toppers |
|
Tree Topper Stars.
Nothing
beats a grand star at the top of
your tree. We've created a quad or octal sided, five pointed star and outlined
it with the latest generation LEDs. We even wired it so each of
the four/eight sections can be on a separate circuit so you can make
that star spin. Grab one of these now and make your tree proud.
Click
here to see it in action!
|
 |
3-D Five Point Star with 4 sides (as pictured)
$149.95 each (Part No. 4PStarTreeTopper) |
|
3-D Five Point Star with 8 sides
$269.95 each (Part No. 8PStarTreeTopper) |
|
Bethlehem Star
$249.95 each (Part No. BethlehemStarTreeTopper) |
|
|
Cables |
|
Male and Female end power cable. Rated at 15 amps.
14 gauge, three conductors, stripped ends. |
  |
|
|
Communication cables are used to connect your Monster Brain or computer to the
Light and Digital I/O controllers. The controllers are connected in a
daisy chain so you need a communications cable between each one. |
 |
|
Power Adapters |
|
AC Adapter. Affectionately called the wall-wart by the
techies in the world. Used to convert standard household alternating
current voltage to low level direct current voltage. Used to power
Animated Lighting Monster Brains and other products., |
 |
|
Wireless Speaker |
|
Water-resistant designed speaker withstands wet conditions encountered
outdoors. Its two-way acoustic suspension design features 1" dome tweeter for
extended upper frequency response and waterproof 5" woofer for deep bass output.
The 15 watt built in amplifier delivers impressive sound! The amplifier
circuitry extends battery life over 100 hours. Eight (8) "C" cell batteries
(sold separately) provide true wireless portability; can also plug into any
standard electrical outlet with AC adaptors (included). The unit has easy access
controls and is the perfect companion to your Animated Lighting product. |
 |
|
$139.00 each (Part No. AW811) |
|
| Connectors
and Repeaters |
|
RJ45 to DB9 Female Connector |
 |
|
RS-485 Converter Board.
Connects a PC to a network of Animated Lighting controllers. Bidirectional interface converts RS232 signals to and from RS485 signals. Features include automatic baud rate adjustment, transmit/receive indicator LEDs, and auxiliary power inputs and outputs for connection to other devices. Two RS232 connectors. Two RS485 connectors.
Download the Instruction Guide (PDF, 237 KB) |
 |
| |
 RS-485
Protocol Repeater For use where the data wire between controllers
covers long distances (>1000') or you have high number of
controllers (>32). Useful in large venues like stadiums, malls, race
tracks, etc. Can be used to clean up dirty data signals in
noisy environments.
Download the Instruction Guide (PDF, 590 KB) |
|
$249.95 each (Part No.
IRSFC24FB) |
|
|
|
6-pin input expander connector pin.
Used with MP3-IO Digital Input/Output Expansion board. Used with Digital Input board |
 |
|
|
8-pin output expander connector pin.
Used with MP3-IO Digital Input/Output Expansion board. Used with Digital Output board. |
 |
